I am so upset. My laptop tumbled on the floor with my USB installed inside of it. Now my USB flash drive is bent and the port doesn't work. Thanks to the laptop stand I had on my bed to hold the laptop. How am I supposed to get the information from the damaged USB on a new USB?
I called a computer shop already.
What do you mean the USB installed inside of it? First off, lesson learned, always have a back up if it is important. Second, can you still access the info on the USB? If so just move the info to your hard drive then on to another USB. If the USB is broken and there is a piece inside of the computer I would try to pull it out with pliers. Get the needle nose ones and see if you can grab ahold of something. If it is already broken you can't mess it up any worse. What did the computer shop tell you?
It shouldn't cost too much to fix if the inside metal is bent only on the inside USB port you think?
It shouldn't. All they have to do is replace that port. But if it is something most people cannot do on their own and you need it done they figure you will pay what they charge. Stuff like that is expensive because they can charge it and people will pay it. Me personally I would try to fix it myself. How many other ports for USB do you have? If you only have one you can get one of them things that turns one into three or four. Won't help with getting info from the damaged usb but will solve the issue of not having enough ports. Of course if you use the device on your bed that will be an issue because it is usually a bigger thing that lays on the desk. I have a couple that I use from time to time when I need several USB devices plugged in at one time.
Yes, now I see all I need is the port replaced but the computer store wants to charge $35 for a diagnostic when I already know what the issue is.. I don't know much about computer parts but I'm still learning. I don't have any other ports that I know of...no I'm sorry. I have 3 on the left side of my laptop but I use those to plug in my cord from my printer to print. The desk is going back to Amazon tomorrow although I feel it was my fault for adjusting it too high when it didn't need to be .
I've never heard of 1 port that turns into 3 or 4. If you feel like it, could you send me a picture? only if you want. Thanks for your advice.